Omcan 25825, Инструкция по эксплуатации, Страница: 8 / 20

8
Controller Instructions
Troubleshooting
Digital Temperature Controller
Front Panel Operation
1. Set temperature.
2. Press the “SET” button, the set temperature is displayed.
3. Press or buttons to modify and store the displayed value.
4. Press the “SET” button to exit the adjustment and display the cold-room temperature.
5. If no more buttons are pressed within 10 seconds, the cold-room temperature will be displayed.
6. Illumination: Press to light. Press again to stop.
Normal air curtain but periodical
fluctuation of cabinet temperature.
Condenser contaminated. Clean the condenser.
Poor venting of the unit. Improve the venting conditions.
Heat protection of compressor
failure.
Replace the heat protection.
Capillary is blocked by ice. Replace the drying filter.
Temperature controller failure. Replace the temperature controller.
NOTE
The murmur of water is heard when the refrigerator is working. The coolant is circulating in the system. During
wet seasons, condensation might be found on the outside of the refrigerator. This is caused by high humidity.
Use a cloth to wipe it.
NOTE
The electric circuit diagram and parameters on the product name plate are final ones. The design of
the machine may be improved without notice. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid hazard.