Omcan 20236, 20237, Инструкция по эксплуатации

Страница: 5 / 28

5
Safety and Warranty
• Never use any kind of tools not belonging to the Saw to help during operation.
• Never touch the blade #08 (Pic.01) when the saw is in operation.
• Never wear loose clothes with wide sleeves mainly around the wrists during operation.
• Never adjust the Thickness Guide #13 (Pic.01) with the saw blade in movement.
• Keep hands away from moving parts.
• Never switch on the Saw with wet clothes or wet feet.
• Ground machine properly during installation.
• The saw has a Thermal Protector for the motor protection. Motor and the operator are protected in case
of over heating. Therefore if the equipment suddenly STOPS, wait a few minutes, then reset the Thermal
Protector pressing the Button #01 (Pic.02).
IMPORTANT: In order to improve user safety the Band Saw is equipped with a safety system, which refrain
itself from being activated if the upper door #04 (Pic.01), the lower door #15 (Pic.01) and the blade guard #17
(Pic.01) are not properly in place.
IMPORTANT:
This equipment must not be used by children or any persons with reduced physical or mental
capability, lack of experience or knowledge, unless they are under supervision or have received from the
person responsible for safety, proper instructions on how to use the equipment.
IMPORTANT: The cord shall be in perfect conditions for the use, check it carefully, and change a damaged
cord using a new one designed in accordance with the technical specifications. The changing shall be made by
qualified professionals and shall respect local safety rules.
IMPORTANT: In case of emergency use emergency switch #03 (Pic.01). To switch the machine back ON push
green button of ON/OFF Switch #02 (Pic.01).
GENERAL SAFETY PRACTICES
IMPORTANT:
If any recommendation is not applicable to your equipment, please ignore it.
The following safety instructions are addressed to both the operator of the machine as well as the person in
charge of maintenance. The machine has to be delivered only in perfect conditions of use by the Distributor
to the user. The user shall operate the machine only after being well acquainted with the safety procedures
described in the present manual. READ THIS MANUAL WITH ATTENTION.
BASIC OPERATION PRACTICES
DANGERS
Some areas of the electric device have parts that are connected or have parts connected to high voltage.
These parts when touched may cause severe electrical shocks or even be lethal. Never touch manual
commands such as switches, buttons, turning keys and knobs with your hands wearing wet clothes and/or wet
shoes. By not following these instructions operator could be exposed to severe electrical shocks or even to a
lethal situation.