Step 6 bis:
now you need the main dimensions of the
monitor that you got in step 5 in order to outdistance the
following pantograph supports. Specifically:
•
Next lateral pantograph supports: they must to be
placed starting from the center point of the
support and adding a lateral distance equal to the
size "A" of the monitor + 1mm. This way you
identify the core of the next lateral support.
•
Next upper pantograph supports:
they must to be
placed starting from the central bar of the support
and adding a vertical distance equal to the size
"B" of the monitor + 1mm. This way you have
identify the core of the next upper support.
Your wall is now ready: you can now start to position the
monitors.
Be very careful when fixing the power cables
t
hat they do not get tangled up in the mobile parts of the
support, with the risk of them being cut or even worse
triggering off unwanted electrical effects
Step 7 :
in order to mount the monitors onto their supports
you must now fix brackets
D
to the VESA holes and fix
the knobs
MZ
to the upper side of the monitor.
After fixing the brackets
D
to the monitor, insert the safety
screws
V
which will have to remain loosened at this
stage
. These screws will be tightened after inserting the
monitor to the pantograph bracket (see Step 9).
Step 8:
you can now position the first monitor onto the
support . Always start from the bottom left.
On the upper part of the pantograph support you'll find 2
knobs (
MX
). These regulate the vertical axis of the
monitor: make sure that they remain within the brackets
D.
The knobs for the regulation of the monitor depth (
MY
)
are on the external structure of the pantograph support.