OMB IN-OUT Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 10

OMB IN-OUT Скачать руководство пользователя страница 8

Step 3

: your pantograph support is now balanced and you

need  to  fix  it  so  that  it  is  perfectly  horizontal.  To  achieve
this,  get  a  level  gauge  and  with  the  use  of  suitable
materials for the type of wall on which the support is to be
fixed,  secure  the  support  using  the  8  fixing  holes

D

( 4

above and 4 below).

Now that you have fixed your bottom left monitor support to the wall you need to take the measurements for the other
monitors: we'll start with the first row.

Step 4:

with a laser level gauge trace a perfectly horizontal

line using the upper part of the already fixed pantograph
support as reference

Step 5:

with the use of the lateral DIME ( included in the

Omb customized Kit

, ) identify the exact position of the

following support next to the first. Be careful to align all
the brackets to the alignment line that you previously
traced.

Step 5 bis:

In case you do not want use the lateral DIME

(included in the

Omb customized Kit

) you can install

however  your  video  wall.  First,  you  have  to  measure  the
two  main  dimensions  of  the  monitor  (width  “A”;  height
“B”).  Then,  you  have  to  identify  the  centre  point  of  the
monitor.

Step 6:

with the use of the superior DIME (included in the

Omb customized Kit)

, position the second row. Always

start from the left and proceed in the same way as you did
with the first row.

«
...
6
7
8
9
10
»

Содержание IN-OUT











Отзывы:

Нет отзывов