www.microscopenet.com
- 6 -
2.7 Replacing the fuse of bottom light power supply
1) Turn off the power and disconnect the power cord.
2) Loosen the 5 screws on the back board and open the
board.
3) Find the fuses on the board inside and take it (them) out.
See
Fig. 5
.
4) Put in the new fuse(s) and put the board back its place.
5) Tighten the 5 screws.
2.8 Installation of the camera
(optional, may not included in
your package)
1) Take off the plastic cover from the photo tube.
2) Insert the camera into the photo tube, and then
connect the camera to a computer via USB2.0 cable.
See
Fig. 6
.
3) The manual for the camera is on a CD (or mini CD).
Refer to the manual to install the driver and software
on to the computer.
4) The camera is optional and may have different color
and shape from the one in the figure, depending on the
model purchased.
2.9
Installation of darkfield condensers
(optional, may
not included in your package)
Please see section 7
(Darkfield Condenser Installation and Operation Instructions)
2.10 Installation of phase contrast kit
(optional, may not included in your package)
Please see section 8
(Phase Contrast Kit Installation and Operation Instruction)
Fuses
Fig. 6
Camera
Photo Tube
Fig. 5
