omake Omk.SBD01.E15.0101.Z5F, Руководство пользователя

Страница: 29 / 43

27
D
– OPERATION INFORMATION
Thermostat General Features:
- - It provides the opportunity to defrost (melting) at regular intervals and lengths.
The temperature of the controlled system is displayed on the screen. Defrost can
be started at any time by pressing the defrost button. It can also be closed
manually via the buttons on the thermostat.
- - With some parameters, the movements of the compressor can be controlled and
overloads that may arise due to overwork in a short time can be prevented.
- There is an alarm system that attracts attention with warning flash indicators. No
audible alarm
Opening the keypad for use;
- Press any button for more than 2 seconds. (UnL) will appear on the screen. You
can use the keys.
Note: For security reasons, if the keys are not pressed for 30 seconds, the device will
automatically switch to the key lock. Before performing any operation, first, remove the
key lock.
Seeing and changing the set value;
- Quickly press the SET button once and remove your hand. The set value is seen
on the screen and the led flashes.
- - To change the value, within 20 seconds or Set it to the required
value using the keys.
- Press the SET button again or wait 20 seconds without pressing any button.
Note: The setpoint can be changed between the values assigned by the r1 and r2
parameters .