omake Omk.FRT01.E11.0060.Z5F, Руководство пользователя

Страница: 37 / 57

35
E
– CLEANING AND MAINTENANCE
Cleaning and maintenance after every use;
✓
Make sure that the plug is not plugged in or the switch is turned off while cleaning the
device.
✓
Clean the surface of the device after each use.
✓
Before it hardens, soften the remains of the burned food residues in the basket with hot
water and wipe it off. If the remaining residue is too hard, scrape it off with a wooden spatula.
✓
Do not use abrasive cleaning chemicals as these can leave harmful residues.
✓
Do not use pressurized water and steam while cleaning the device.
✓
Do not clean the outer stainless surface of the device with cleaner that can scratch the
material such as wire wool.
Periodic cleaning and maintenance;
✓
Maintenance should be done by qualified person.
✓
Depending on the frequency of use, the oil in the tub should be drained periodically and
cleaned of food particles.
✓
The parts that need to be removed during periodic cleaning should be removed and
reassembled by the technical service personnel.
✓
According to the frequency of use, the electrical maintenance of the device should be done
by spraying dry air after the electrical connection is cut.
✓
Thermostat Replacement:
- Open the tap under the tub and drain the oil inside.
-Remove the control panel and separate the part to be replaced from the fasteners.
-Remove the part and replace it with a new one and replace the control panel.