![background image](http://html1.mh-extra.com/html/om-power/x8nom4000a/x8nom4000a_instruction-manual_3898874006.webp)
Page
6
from
38
2.
SAFETY INSTRUCTIONS
WARNING!
DANGEROUS HIGH VOLTAGE INSIDE!
The power amplifier is using high voltage up to 3400V DC, which is very dangerous for
human life! Read next safety instructions carefully first, before you will start to install and
operate power amplifier! NEVER VIOLATE NEXT RULES!
WARNING!
NEVER ALLOW CHILDREN to play around PA or to touch power amplifier or connected
cables in working condition, or to push anything into the case holes!
WARNING!
The amplifier contains high voltage circuits. Never turn the amplifier on without the upper
lid in place. DO NOT ATTEMPT TO SHORT OR BYPASS safety switch under upper lid!
WARNING!
The OM4000A amplifier can be operated ONLY if both of supply cables are connected!
WARNING!
The OM4000A amplifier is neither to be used in a WET or HUMID environment nor to be
exposed to RAINFALL!
WARNING!
Do not turn the amplifier ON without having connected the ANTENNA or properly rated
DUMMY LOAD! A hazardous HF voltage may build up on the antenna connector after turning
the amplifier on with no antenna or dummy load connected!
WARNING!
Before opening the upper lid of the amplifier make sure that power supply has been
disconnected AT LEAST 5 minutes allowing the electrolytic capacitors to discharge fully.
Disconnect power cord from the outlet!
Содержание X8NOM4000A
