OLYS AC1230PRO Скачать руководство пользователя страница 2

1 .

Safety instructions

CAUTION: CAREFULLY READ AND FOLLOW ALL SAFETY INSTRUCTIONS

!

• 

• do not cover or place anything on the top of the charger.

• do not place the charger on top of the battery.

• ensure that there is no spark or ignition source near the battery; 

  The battery will release explosive gas when charged.

• battery acid is corrosive; If the battery acid comes into contact 

with the skin, rinse it with water immediately.

• do not attempt to charge non rechargeable or frozen batteries.

• children or people who cannot read and understand the 

instructions shall not use the charger manual unless they are under 

the strict supervision of the person in charge,So as to ensure the 

use of the charger and safely store and use the charger in a place 

out of the reach of children.

• the charger must be connected in thefollowing order:1. Connect 

the charger output DC cable to the 

battery terminal, away from the battery and any fuel line / power 

supply2. Connect the AC power cable to the main power outlet 

and turn on the AC switch

• after charging, the charger must be disconnected in the following 

sequence (opposite to the connection sequence):

1. Disconnect the AC power cable from the main power outlet

2. Disconnect the DC cable to the chassis

3. Disconnect the DC cable connected to the battery terminal

• power connections must comply with local electrical regulations. 

If the AC power cable is damaged, please contact the manufacturer or service agent

.• the charger can only be plugged into a grounded AC power outlet.

Ensure that the area around the battery and charger is well ventilated.

Содержание AC1230PRO










Отзывы: