Olympus Vanta iX Series, Руководство по установке

Страница: 30 / 88

10-019116-01EN, Rev. 2, January 2021
Chapter 1 22
Refer to governing regulations for compliance requirements applicable to the
installation area, dose limits, etc. Requirements differ depending on the region of your
particular country. Do not rely solely on this manual for instructions.
Adequate shielding is achieved by implementing the following measures:
— Establishing a no-access zone at a sufficient distance from the Vanta iX
measurement window, which will allow air to attenuate the beam.
— Enclosing the beam working area with protective panels (3.0 mm stainless
steel panels are capable of attenuating the beam to background levels).
Contact your Olympus representative for assistance and recommendations on
interlocks and operating procedures that limit radiation exposure.
1.5 General Precautions
Comply with the precautions indicated in this chapter to reduce the following risks:
• Users
— Physical injury
— Electric shock
— Radiation exposure
• Equipment damage
— Measurement window
— Overheated electronics and other internal components
1.6 Service Considerations
Except as expressly noted in this document, do not service any Olympus product
yourself. Opening or removing the external housings may expose you to electric
shock and subject the instrument to mechanical damage, and it also voids the
warranty.
IMPORTANT