Olympus U-UVF248, Инструкция по эксплуатации

Страница: 13 / 24

10
U-UVF248
}Before turning on the system, be sure to close the shutter by setting the shutter selector lever of the UV248 light source
box to the bottom position (marked {).
SUMMARY OF VISIBLE/UV LIGHT OBSERVATION PROCEDURE
Turn on the system.
Visible light observation
UV observation
(Operation)
1. Switch on the power supply for mercury/xenon burner (by setting the
power switch to “ ” and then setting the start switch to ON).
2. Switch on the microscope.
3. Switch on the TV camera/monitor for UV observation.
4. Switch on other set-up modules.
1. Set the light path of the reflected light illuminator to the BF position.
2. Engage a low-power objective for visible light observation in the light
path.
3. Place a specimen and adjust the focusing and brightness.
4. Engage a high-power objective for visible light observation and adjust
the focusing and brightness.
1. Set the light path of the reflected light illuminator to the DF position.
2. Engage the MApo100X objective for UV observation.
3. Set the shutter selector lever of the UV248 light source box to the upper
position (marked \).
4. Observing the monitor, adjust the focusing and brightness.