Olympus U-LGPS, Инструкция по эксплуатации

Страница: 7 / 24

3
U-LGPS
Safety precautions
If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
product may also be damaged. Always use the product according to this instruction manual.
Installation
Laser safety
Secure the space of 5 cm or more around the product.
Otherwise, the ventilation route is not secured and the heat is filled inside the product, which may cause a
fire.
WARNING
Install the product on a sturdy, level table or bench.
For safety in particular, do not place a mat, etc. under the product. Otherwise, the product may overturn.
CAUTION
· Never peel off the warning label.
CAUTION
Warning label position: Right side surface of U-LGPS
This product is specified as CLASS 1 laser product.
This product complies with 21 CFR 1040.10 and 1040.11 except for conformance with
IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8,2019.
CLASS 1 LASER PRODUCT (IEC60825-1:2007 / IEC60825-1:2014)
· Do not remove the cover.
It is very dangerous because the laser beam equivalent to CLASS 4 is emitted. And the product may also be
damaged.
This product uses the fluorescence of the phosphor excited by the laser beam emitted from the LD bank as
the illumination light.
Specifications of LD bank:
· Dominant wavelength: 455±5 nm
· Output: 36 W
TIP