Olympus TRPP 5810, Руководство пользователя

Страница: 26 / 44

DMTA-20070-01EN, Rev. A, October 2014
Chapter 2 20
2.2 Connecting the TRPP 5810 Unit
The connectors for the probes are located on the front of the TRPP 5810 unit. The
POWER input connector and the connectors that interface with the acquisition unit
are located on the back of the TRPP 5810 unit.
Refer to the label affixed to the bottom side of the unit for an illustration of the
common connections to the product (see Figure 2-1 on page 20).
Figure 2-1 TRPP 5810 connection diagram label
To prevent the risk of electric shock, the product must be connected according to the
manufacturer’s instructions.
To connect the TRPP 5810 unit
1. Connect the pulser probes to the P1 OUT and P2 OUT connectors.
2. Connect the receiver probes to the R1 IN and R2 IN connectors.
Probes
Acquisition unit
To acquisition
unit receiver
inputs
From acquisition
unit transmitter
outputs
From
R1 Out
From
R2 Out
To
P1 In
To
P2 In
To
R1
In
To
R2
In
TRPP 5810 connection diagram
To
P1
Out
To
P2
Out
CAUTION