Olympus TG 850, Инструкция по эксплуатации

Страница: 28 / 111

28 EN
p
(Panorama mode)
You can shoot and combine multiple images to create an image with a wide
angle of view (panoramic image).
1
Rotate the mode dial to
p
.
2
Press the
A
button to go to the function menu. Use HI to
select a sub mode and press the
A
button at the end.
Submenu Application
Auto
Panorama images are automatically combined just by
swinging the camera in the shooting direction.
Manual
Three frames are taken and combined by the camera.
The user composes the shots using the guide frame
and manually releases the shutter.
• Move the camera as if rotating it around a vertical axis through the center
of the lens to take better panorama images.
Taking pictures with [Auto]
1 Select [Auto] in the submenu,
and press
G
. Use
HI
to select
the angle of view (STD:180°,
FULL:360°) and then press the
A
button.
2
Point the camera to the start
position.
3 Press the shutter button to begin
shooting.
AUTO
FULL
MENU Cancel OK
Save
Guide
4
Start panning. When the arrow reaches the end of the guide, recording ends
automatically.
• The camera automatically processes the images and the combined
panorama image is displayed.
• To stop shooting in the middle, press the shutter button or
A
button. If
the camera pauses for a while, shooting automatically finishes.
• If the message [Image was not created.] is displayed, shoot again.
• To cancel the panorama function, press the

button.