Olympus TG-830, Инструкция по эксплуатации

Страница: 10 / 101

10 EN
●
Position data may be unavailable or contain errors
in the following locations:
●
Locations without a clear view of the sky
(indoors, underground or underwater, or near
trees or tall buildings)
●
Locations subject to strong magnetic or radio
interference (near high-voltage power lines,
magnets, electronic devices, or cell phones
operating in the 1.5 GHz band)
●
GPS data may take more time acquire or be
unavailable in some locations or at certain times
of day.
●
Do not cover the GPS antenna with your hands or
metal objects.
●
If the battery is low, the camera cannot acquire
GPS data while the camera turns off.
●
The camera is not equipped for GPS navigation.
●
While [Track] is [On], the GPS receiver will
continue to draw power from the battery when the
camera is off.
●
GPS data are not recorded with movies.
●
Press the INFO button while the camera is turned
off. The current time and the shooting location are
displayed for approx. 30 seconds.
Learning how to use the
camera
●
Press the
n
button to turn on the camera and
enter the standby mode. (Press the
n
button
again to turn off the camera.)
●
Select the shooting mode, and press the shutter
button to shoot a still image.
●
To shoot a movie, press the
R
button.
●
Set the shooting functions using the function
menu or the setup menu.
●
To view images, press the
q
button to switch to
playback mode.
●
To return to standby mode, press the
q
button
again, or press the shutter button halfway down
and then release it.
●
Press and hold the
q
button while the camera is
turned off to start up the camera in the playback
mode.
●
In this case, pressing the
q
button again sets
the camera to the standby mode.