Olympus SP-560, Инструкция по эксплуатации

Страница: 27 / 101

EN
27
Me
nu opera
tions
You can take a sequence of pictures at one time by holding down the shutter button. The camera
will take pictures continuously until you release the shutter button.
• Only [
o ] is available when record mode is set to [RAW].
• Flash cannot be used when [
c
] or [
d
] is set.
• When [ c ] is set, [IMAGE QUALITY] is limited to below [2048x1536] and the maximum number
of pictures that can be taken for sequential shooting is approximately less than 23.
• When [
d
] is set, [IMAGE QUALITY] is limited to below [1280x960] and the maximum number
of pictures that can be taken for sequential shooting is approximately less than 40. (This includes
the 10 pictures stored shortly before shooting if [PRE-CAPTURE] is set to [ON].)
• When [
c
]or [
d
] is selected, [ISO]cannot be set to [HIGH ISO AUTO], [50], [100] or [200].
When [
d
] is selected
• When [PRE-CAPTURE] is set to [ON], pressing the shutter button halfway stores 10 frames of
a picture shortly before shooting.
When [BKT] is selected
This function allows you to zoom up to 27x by combining the optical zoom and image cropping.
As data with few pixels are not converted to multiple pixels, there is no loss of image quality.
• [IMAGE QUALITY] is limited to below [2048x1536].
DRIVE ............................................................................................
Continuous shooting
o Shoots 1 frame at a time when the shutter button is pressed.
j Focus and exposure are locked at the first frame. The sequential
shooting speed varies depending on the setting of image quality.
c
Pictures can be taken at a faster speed than normal sequential
shooting.
d
Sequential shooting at a speed of 15 frames/sec.
i Adjusts the focus 1 frame at a time. The shooting speed is slower than
for normal sequential shooting.
BKT Takes pictures sequentially while changing the exposure for each
frame (Bracket shooting). Focus and white balance are locked at the
first frame.
PRE-CAPTURE OFF /ON
Exposure differential ± 0.3 / ± 0.7 / ± 1.0
Number of frames x3 / x5
• Press the shutter button completely and keep it pressed to shoot the
preset number of pictures. You can stop shooting at any time by
releasing the shutter button.
FINE ZOOM .................................
Zooming in on your subject without reducing image quality
OFF /ON
g
OK SET MENU BACK
BKT
0.7
1.0
0.3 ×3
×5
for measuring the brightness of a
subject without reducing image
d4355_e_unified_forU-Print_00_bookfile.book Page 27 Thursday, July 12, 2007 11:01 AM