CMOS color camera SC100
30
6.2.3
The correct camera driver is not available
Problem:
During the installation of the camera driver, the correct entry
Olympus
Soft Imaging Solutions SC100 Camera
does not appear.
The correct camera driver
is not yet available on your PC.
Solution:
Install your software again. Do the following:
Install the software
again.
1)
Disconnect the camera and the PC by pulling out the USB plug.
2)
Repeat steps 1 to 3 (MS-Windows Vista), or 1 bis 4 (MS-Windows XP) of the
installation instructions. To do this, follow the instructions on page 13. Please
be sure that you select the manufacturer
Olympus Soft Imaging Solutions
and
the
SC100
camera in the
Image Source Selection
dialog box.
6.2.4
The camera was not selected
Problem:
With the MS-Windows XP operating system, a sub-entry
USB Device
that
is highlighted in yellow appears in the Device Manager below the USB Controller
entry. The camera driver has been correctly installed, but the camera was not
selected.
Solution:
Select the camera. Do the following:
Select the camera as
decribed in step 4 of
the installation
instructions.
1)
Doubleclick the
USB Device
entry in the Device Manager.
A dialog box containing the driver's properties opens.
2)
Click on the
Driver
tab, then, click the
Update
button.
The hardware wizard will be opened.
3)
Now, follow the step-by-step-instructions in chapter 4.4 on page 20.
4)
Close the dialog box containing the driver's properties.
In the Device Manager, the correct camera
Olympus Soft Imaging Solutions
SC100 Camera
will now appear as a sub-entry below the USB Controller.
Содержание SC100
Страница 1: ...User Manual SC100 CMOS color camera...