Olympus R1, Инструкция по эксплуатации

Страница: 45 / 47

44
CHAPTER 7 – POWER CORD SELECTION
If a power cord has not been provided, please select the proper power cord for the instrument by referring to
the Specifications and Certified Cords table below.
If you use a non-approved power supply for Olympus products, Olympus can no longer warrant the
electrical safety of the instrument.
Specifications
Voltage Rating 125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
Current Rating
6A minimum
Temperature Rating
60°C minimum
Length 3.05 m maximum
Fittings Configuration
Grounding type attachment plug cap.
Opposite terminates in molded-on IEC configuration appliance coupling.
Table 1: Certified Cords
A power cord should be certified by one of the agencies listed in the following table, or comprised of cordage
marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one
of the agencies listed in Table 1. In case you are unable to buy locally in your country the power supply cord
which is approved by one of the agencies mentioned in Table 1, please use replacements approved by any other
equivalent and authorized agencies in your country.
Country Agency
Certification
Mark
Country Agency
Certification
Mark
Australia SAA Italy IMQ
Austria ÖVE Japan JET, JQA
Belgium CEBEC Netherlands KEMA
Canada CSA Norway NEMKO
Denmark DEMKO Spain AEE
Finland FEI Sweden SEMKO
France UTE Switzerland SEV
Germany VDE United Kingdom ASTA,BSI
Ireland NSAI U.S.A UL