background image

Handling the Product

● Use  or  storage  of  the  product  at  the  following  locations  may  cause

defective  operation,  defects,  trouble,  damage,  fire,  internal  clouding,  or
water leakage. Always avoid these locations.

・ Locations  reaching  high  temperatures  such  as  those  under  direct

sunlight, in an automobile, etc.

・ Locations with open fire
・ Water depths in excess of 40 m
・ Locations subject to vibrations
・ Locations  with  high  temperatures  and  much  dust  or  with  severe

temperature changes

・ Locations with volatile substances

● This  product  is  made  of  polycarbonate  resin  with  excellent  impact

resistance,  but  it  may  be  damaged  by  scraping  against  rocks  etc.  It  also
may break when it hits hard objects or is dropped.

● This  product  is  not  a  case  to  soften  impacts  to  the  camera  inside  the

product.  When  this  product  with  a  digital  camera  inside  it  is  subjected  to
impacts  or  heavy  objects  are  placed  onto  it,  the  digital  camera  may
become damaged. Please handle the product with sufficient care.

● When the product is not used for a long time, the waterproof performance

may  drop  because  of  deterioration  of  the  O-ring  etc.  Before  use,  always
perform the advance test and the final check.

● Do not apply excessive force to the tripod socket.
● When a flash is used while the Case is being used, shadows may appear

at the edges of the picture. This is especially notable when taking pictures
in  macro  mode  on  the  wide-angle  side.  Please  use  a  flash  after  image
confirmation.

8.When the O-ring contact surface is pressed strongly from the outside of

the Case, or when the Case is twisted, the waterproof function may be
lost. Take care not to exert excessive force.

9.Please  use  the  Case  after  performing  the  advance  test  and  the  final

check.
If you should notice drops of water or other signs of water leakage while
taking  pictures,  immediately  stop  the  dive,  remove  any  water  from  the
camera  and  the  product,  test  according  to  the  item  "Final  check",  and
confirm whether leakage has occurred or not.

E-5

10.

Содержание PT-016







































Отзывы: