background image

1.Keep this product out of the reach of babies, infants, and children. There

is the possibility of occurrence of the following types of accidents.

・ Injury by dropping onto the body from a height.
・ Injury from parts of the body getting caught in parts which open and close.
・ Swallowing of small parts. Please consult a physician immediately if any

parts have been swallowed.

・ Triggering of the flash in front of the eyes may cause permanent vision

impairment etc.

2.Do not store with a battery in the digital camera housed in this product.

Storage with a battery inserted may lead to leakage of the battery liquid
and fire.

3.If leakage of water should occur with a camera installed in this product,

quickly  remove  the  battery  from  the  camera.  There  is  the  possibility  of
ignition and explosion from generation of hydrogen gas.

4.This product is made of resin. There is the possibility that injuries may be

caused when it becomes broken because of strong impact with a rock or
other hard objects. Please handle with sufficient care.

5.The silica gel and the grease for silicone O-rings for this product are not

edible.

1.Do not disassemble or modify this product. This may cause water leakage

or trouble. In case of disassembly or modification by persons other than
those appointed by our company, the guarantee shall not apply.

2.Do not place this product at locations with abnormally high or abnormally

low temperatures or at locations with extreme temperature changes. The
product may deteriorate.

3.Opening and closing at locations with much sand, dust, or dirt may impair the

waterproof characteristic and cause water leakage. This should be avoided.

4.This  product  has  been  designed  and  manufactured  for  use  at  a  water

depth within 40 m. Please note that diving to a depth in excess of 40 m
may  cause  permanent  deformation  or  damage  to  the  Case  and  the
camera inside the Case or may lead to water leakage.

5.Jumping  into  the  water  with  the  Case  in  your  pocket  or  in  your  hand,

throwing  the  Case  from  a  boat  or  ship  into  the  water,  and  other  rough
handling  may  cause  water  leakage.  Please  handle  with  sufficient  care,
when handing it over from hand to hand etc.

WARNING

CAUTION

E-2

Содержание PT-016







































Отзывы: