5
M
enu setting method
67
EN
Menu setting method
Low Cut Filter
The recorder has a Low Cut Filter function to minimize
low-frequency sounds and record voices more clearly.
This function can reduce noise from air conditioners
and projectors and other similar noises.
[
300Hz
]:
Use this setting when sufficient noise reduction
cannot be obtained with the [
100Hz
] setting.
[
100Hz
]:
This setting will reduce the noise generated from air
conditioners and projectors. It is effective for indoor
recording.
[
Off
]:
Disables the Low Cut Filter function.
• To confirm the setting, press and hold the
F3
(
INFO
)
button at the [
Home
] screen (
☞
P.23).
Plug-in Power
External microphones supported by plug-in power
can also be used. You can configure the recorder
according to whether or not you want to supply
power to external microphones.
[
On
]:
When the plug-in power function is activated,
power will be supplied to any connected external
microphone. Select this option when external
microphones to be supported by plug-in power are
connected (
☞
P.94).
[
Off
]:
Disables this function. Select this option when
external microphones that you do not want to
support with plug-in power are connected.
• Turn the plug-in power function to [
Off
] when
an external microphone that does not need to
be supported by plug-in power is connected, as
there is a risk that noise may be generated while
recording.
Mic Select (LS-14 only)
Select whether or not the built-in center microphone
is to be turned On or Off.
[
Central Mic ON
]:
Recording will be performed in 3-microphone
mode.
[
Central Mic OFF
]:
Recording will be performed using only the built-in
stereo microphones.
• To confirm the setting, press and hold the
F3
(
INFO
)
button at the [
Home
] screen (
☞
P.23).
2
Select the recording rate.
When [
PCM
]
*1
is selected:
[
96.0 kHz/24 bit
] to [
44.1 kHz(mono)
]
*2
When [
MP3
] is selected:
[
320 kbps
] to [
64 kbps(mono)
]
*2
*1
Files saved in the PCM (WAV) format
correspond to BWF (Broadcast Wave
Format), and the date and time that each
file is recorded is added to the file.
*2
Monaural recording.
• For clear recording of musical performances or
choirs, set [
Rec Format
] to any value other than
[
mono
] before starting recording.
• When an external monaural microphone is used
while [
Rec Format
] is set to a stereo recording
mode, audio is recorded to the L channel only.
• To confirm the setting, press and hold the
F3
(
INFO
)
button at the [
Home
] screen (
☞
P.23).
