Olympus IX51 Скачать руководство пользователя страница 56

Страница: 56 / 76

Light path selection

S8F-3: Binocular 100% or Binocular 20%/Side port 80%

(with shockless mechanism)

S1F-3: Binocular 100%/Side port 100%

Intermediate magnification changer: 1X 1.6X

Side port magnification: 1X (perfect aberration correction)
Focusing up/down stroke: 9 mm (7 mm above focusing position plus 2 mm
below focusing position)
6-position revolving nosepiece (DIC slider attachable)

SPECIFICATIONS

Module

Specification

Microscope
Frames

IX71S8F-3
IX71S1F-3
IX51S8F-3
IX51S1F-3

The IX51 series does not use an
intermediate magnification
changer.

Illumination
Columns

IX2-ILL100

Column for installing the lamp housing for 100 W halogen bulb, precentered.
With 30° tilting mechanism.
Variety of condenser can be attached.

IX2-ILL30

Column for installing the U-LS30-3 lamp socket for 6 V, 30 W halogen bulb.
Precentered.
Provided with a condenser (NA 0.3, WD 72 mm)

Observation
Tube

U-BI90CT

Binocular tube with 45° tilting angle. Built-in CT, diopter adjustment on one
eyepiece possible. Eye point switchable in 2 steps of 400 and 430 mm.

U-BI90

Binocular tube with 45° tilting angle. Diopter adjustment on one eyepiece
possible. Eye point switchable in 2 steps of 400 and 430 mm.

U-TBI90

Binocular tube with 35° to 85° tilting angle. Diopter adjustment on one eyepiece
possible. Eye point 406 to 471 mm.

U-TR30H-2

Trinocular tube with 30° tilting angle. Can be installed by means of the IX-ATU
intermediate tube. Eye point 434 mm.

U-MO

Monocular tune with 45° tilting angle. 10X eyepiece fixed.

Condensers

IX2-LWUCDA2, IX2-LWUCD

NA 0.55, WD 27 mm. Motorized turret with 6 positions or manual turret with 5
positions.

IX-ULWCD

NA 0.3, WD 73 mm. Manual turret with 4 positions.

U-UCD8

Dry: NA 0.9, WD 1.5 mm.
Oil immersed: NA 1.4, WD 0.6 mm.

Stages

IX2-SFR

Coaxial flexible knobs on the bottom right position. Movement range 50 mm

(X) x 50 mm (Y). Center plate diameter 110 mm.

IX-SVL2

Coaxial knobs on the bottom left position. Movement range 50 mm (X) x
43 mm (Y). Center plate diameter 110 mm.

IX2-SP, IX-MVR

Size 232 mm (X) x 240 mm (Y). Coaxial flexible knobs on the bottom side.
Movement range 130 mm (X) x 85 mm (Y). Center plate diameter 110 mm.

IX2-KSP, CK40-MVR

Size 160 mm (X) x 240 mm (Y). Coaxial knobs on the bottom. Movement range
120 mm (X) x 78 mm (Y). Center plate diameter 110 mm.

Eyepieces

WHN10X

Field number 22.

WHN10X-H

Field number 22, with diopter adjustment helicoid.

35WHN10X

Field number 22, with 35 mm film photo mask and diopter adjustment helicoid.

Содержание IX51













































































Результаты поиска

Содержание IX51

Отзывы:

Похожие инструкции для IX51

Бренды по названию

Популярные бренды

Olympus IX51, Инструкция по эксплуатации

Результаты поиска

Содержание IX51

Отзывы:

Похожие инструкции для IX51

Бренды по названию

Популярные бренды