Olympus IR-500, Справочное руководство

Страница: 72 / 259

72
Chap
te
r
4:
S
e
tt
ing accordi
ng t
o
s
h
oot
ing condi
tio
n
s
Adjusting the settings to suit a bright/dark subject (
F
)
3
Press
d
to enter the exposure compensation settings, then press
a
/
c
to select the exposure compensation value.
The gauge for adjusting exposure compensation appears on the monitor.
4
Press
9
.
The selected exposure compensation value is set. Press
p
to start shooting with the new
settings.
Tips
• Often bright subjects (such as snow) will turn out darker than their natural colors. Adjusting towards “+”
makes these subjects closer to their real shades. For the same reason, adjust towards “–” when shooting
dark subjects.
• We recommend that you return the exposure compensation value to “0.0” after taking a picture with an
adjusted exposure compensation.
• To save the selected exposure compensation value for the next time you use the camera, set “ALL RESET”
to “OFF.” For details, see “Saving the settings (ALL RESET)” (
g
page 148).
Note
If the flash is used, the image brightness (exposure) may differ from the intended brightness (exposure).
OK 0.0 0.0
GO SELECT CANCEL
Adjusts towards “+” to
give a brighter image.
Adjusts towards “–” to
give a darker image.
+2.0 +2.0
4M 4M
Exposure compensation value
If a value other than “±0” is set, it appears on
the monitor. If “±0” is set, the exposure
compensation value on the monitor
disappears.
00E Adam .book Page 72 Tuesday, November 9, 2004 3:24 PM