Olympus InterBox EIB-T-8-M-15-OM Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 50

Olympus InterBox EIB-T-8-M-15-OM Скачать руководство пользователя страница 17

DMTA031-01EN, Rev. B, October 2014

Important Information — Please Read Before Use

11

qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.

•

Do not touch the connectors directly by hand. Otherwise, a malfunction or electric
shock may result.

•

Do not allow metallic or foreign objects to enter the device through connectors or
any other openings. Otherwise, a malfunction or electric shock may result.

Equipment Disposal

Before disposing of the InterBox, check your local laws, rules, and regulations, and
follow them accordingly.

CE (European Community)

WEEE Directive

This device complies with the requirements of both directive
2004/108/EC concerning electromagnetic compatibility and directive
2006/95/EC concerning low voltage. The CE marking indicates
compliance with the above directives.

In accordance with European Directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE), this symbol indicates that the
product must not be disposed of as unsorted municipal waste, but
should be collected separately. Refer to your local Olympus distributor
for return and/or collection systems available in your country.

«
...
15
16
17
18
19
...
»

Содержание InterBox EIB-T-8-M-15-OM



















































Отзывы:

Нет отзывов