258
EN
Setting Up the Camera
7
Calibrating the Level Gauge
(Level Adjust)
PA S M B
n
Correct deviation in the level gauge. Calibrate the gauge if you find it is no longer truly
plumb or level.
Menu
MENU
n
e
n
6. Reset/Clock/Language/Others
n
Level Adjust
Reset
Reset the gauge to factory default settings.
Adjust
Choose the reference (zero) point. Calibrate the level gauge after
positioning the camera appropriately.
Image Processing Check
(Pixel Mapping)
PA S M B
n
Check the image sensor and image processing functions simultaneously. For best
results, end shooting and playback and wait at least a minute before performing
proceeding.
#
Be sure to perform the check again if you accidentally turn the camera off while the check
is in progress.
Menu
MENU
n
e
n
6. Reset/Clock/Language/Others
n
Pixel Mapping
Viewing the Firmware Version
(Firmware Version)
PA S M B
n
View the versions of the firmware for the camera and any lenses or other peripherals
currently connected. You may need this information when contacting customer support
or performing firmware updates.
Menu
MENU
n
e
n
6. Reset/Clock/Language/Others
n
Firmware Version
Viewing Certificates
(Certification)
PA S M B
n
Display the compliance certificates for some of the standards with which the camera
complies. The remaining certificates can be found on the camera itself or in the camera
manual.
Menu
MENU
n
e
n
6. Reset/Clock/Language/Others
n
Certification