Olympus IM002, Инструкция по эксплуатации

Страница: 23 / 201

23 EN
Shooting
2
Switching the information display
You can switch the information displayed in
the monitor during shooting using the
INFO
button.
INFO
button
INFO INFO
Level Gauge display
(Custom2)
250 250 F5.6 P
38 38
S-IS AUTO S-IS AUTO
ISO-A
200
Wi-Fi
1:02:03 1:02:03
100%
INFO INFO
Image Only
Histogram display
(Custom1)
Basic Information
100%
38 38
250 250 F5.6 P
S-IS AUTO S-IS AUTO
ISO-A
200
Wi-Fi
1:02:03 1:02:03
100%
38 38
250 250 F5.6
L N
S-IS AUTO S-IS AUTO
ISO-A
200
Wi-Fi
F FHD
60p
1:02:03 1:02:03
100%
INFO INFO INFO INFO
• You can change Custom1 and Custom2 settings.
g
[
G
/Info Settings] > [LV-Info] (P. 115),
[
V
Info Settings] (P. 121)
• The information shown in movie (
n
) mode can differ from that displayed in still
photography mode.
g
Video Menu > [
n
Display Settings] (P. 101)
• The information display screens can be switched in either direction by rotating the dial
while pressing the
INFO
button.
Histogram display
A histogram showing the distribution of brightness
in the image is displayed. The horizontal axis
gives the brightness, the vertical axis the number
of pixels of each brightness in the image. Areas
above the upper limit at shooting are displayed in
red, those below the lower limit in blue, and those
within the spot metering range in green.
More
Less
Dark Bright
Level gauge display
The orientation of the camera is indicated. The “tilt” direction is indicated on the vertical bar
and the “horizon” direction on the horizontal bar.
Use the indicators on the level gauge as a guide.