Olympus i-SPEED 2, Инструкция по эксплуатации

Страница: 5 / 116

3
i
--SPEED LT,
i
--SPEED 2
Operating precautions
Olympus will only be considered responsible for the safety, reliability
and performance of the system if the following precautions are
strictly adhered to:
1.
Do not operate the equipment in the presence of
combustible gases or vapours.
2.
If in any doubt about the operating environment, contact
Olympus.
3.
The
i-
SPEED LT
and standard
i
-- SPEED 2
must not be
used for high--G applications as detachment of the
camera, camera parts, accessories or connectors may
result.
4.
The CDU is not G--rated but can be detached and
reattached without affecting the
i
-- SPEED 2
HG camera.
5.
The equipment has no resistance to fluid ingress -- do not
use the equipment where contact with fluid is likely, or
already suspected.
6.
Do not operate the equipment in live electrical or moving
machinery as electric shock or physical injury to the user
may result.
7.
Do not operate the equipment when connected to a
borescope/fiberscope which is in contact with live
electrical or moving machinery as electric shock or
physical injury to the user may result.
8.
When a recorded image is frozen on the display, take
care not to touch subject equipment which may still be
moving.
9.
Do not connect the equipment to a vehicle battery while
the vehicle is running as the power supply may rise to
15V and cause damage to equipment.
10.
Ensure all equipment is earthed (grounded) to the same
potential as the camera prior to operation. Failure to earth
equipment may result in electric shock.