EMP-H35S, EMP-H65S & EMP-H100S QUICK REFERENCE GUIDE
7
L A S E R O P E R A T I O N
Saving settings on the H65 and H100
n
On the H65 and H100, settings can be saved under presets to use again.
n
From the main screen, select the settings button and then choose presets.
n
In the Presets screen, select new to save current settings as a new preset. Enter a name for the preset
and click OK. This setting can be referenced again by selecting Presets on the home screen.
H35 Emission and Ready screens
H65 & H100 Emission and Ready screens
Activating the laser
n
To activate the laser, first put the laser in READY mode by pressing the READY button on the screen or
the circular button on the foot switch. If using the foot switch button, note that the button must be held
down for a few seconds to activate (until beep is heard). This is a safety feature to prevent accidental
button pressing.
n
Step on the foot pedal to activate the laser.