Olympus E-PM2, Инструкция по эксплуатации

Страница: 86 / 133

86 EN
Frequently-used options and customization
3
Shutter speeds when the fl ash fi res automatically
[
#
X-Sync.] [
#
Slow Limit]
The relationship between the shutter speed when the fl ash fi res and the setting values
is as follows. The upper limit of synchronization timing is set by [
#
X-Sync.], and the
shutter speed locked when the fl ash fi res ( fi xed timing when fl ash fi res) is set by
[
#
Slow Limit].
Shooting
mode
Flash timing
Upper limit of
synchronization timing
Fixed timing when
fl ash fi res
P
1/ (lens focal length × 2)
or synchronization timing,
whichever is slower
1/250*
1/60
A
S
The set shutter speed
―
M
* 1/200 sec. when using an separately sold external fl ash unit
Adding effects to a movie [Movie Effect]
You can add effects to a movie using [Movie Effect]. Set [Movie Effect] to [On] in the
menu before selecting the effects.
1
Select
n
as the shooting mode.
g
“Setting the Shooting mode” (P. 17)
2
Press the R button to begin recording.
• Press the R button again to end recording.
3
Press the following buttons to use effects.
G
Multi Echo
Apply an after-image effect. After-images will appear behind
moving objects.
I
One Shot Echo
An after-image will appear for a short time after you press the
button. The after-image will disappear automatically after a
while.
Fn
Art Fade
Film with the selected picture mode effect. The fade effect is
applied to the transition between scenes.
Multi Echo
Press G to apply movie effects. Press G again to cancel the movie effects.
One Shot Echo
The effect is added each time I is pressed.
Art Fade
Press the Fn button and then rotate the control dial to select the picture mode. Press
Q
or
wait about 4 seconds for the effect to be applied.