Olympus E-PM2, Инструкция по эксплуатации

Страница: 33 / 133

33 EN
Basic operations
2
Using a fl ash ( fl ash photography)
The fl ash can be set manually as required. The fl ash can be used for fl ash
photography in a variety of shooting conditions.
1
Attach the fl ash unit and raise the fl ash
head.
•
g
“Attaching the fl ash unit” (P. 14)
2
Press the
#
button ( I ) to display options.
3
Use
HI
to choose a fl ash mode and press
Q
.
• The options available and the order in which they are displayed vary depending on
the shooting mode.
g
“Flash modes that can be set by shooting mode” (P. 34)
AUTO Auto fl ash
The fl ash fi res automatically in low light or
backlight conditions.
# Fill-in fl ash
The fl ash fi res regardless of the light
conditions.
$
Flash off The fl ash does not fi re.
!
/ #
! Red-eye reduction fl ash
This function allows you to reduce the red-
eye phenomenon. In
S and M modes, the
fl ash always fi res.
# SLOW
Slow synchronization
(1st curtain) Slow shutter speeds are used to brighten
dimly-lit backgrounds.
!
SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction
fl ash
Combines slow synchronization with red-eye
reduction.
# SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The fl ash fi res just before
the shutter closes to
create trails of light behind
moving light sources.
# FULL ,
# 1/4 etc.
Manual
For users who prefer manual operation. If
you press the
INFO
button, you can use the
dial to adjust the fl ash level.
4
Press the shutter button all the way.
#
Cautions
• In [
!
/
#!
(Red-eye reduction fl ash)], after the pre- fl ashes, it takes about 1 second
before the shutter is released. Do not move the camera until shooting is complete.
• [
!
/
#!
(Red-eye reduction fl ash)] may not work effectively under some shooting
conditions.
• When the fl ash fi res, the shutter speed is set to 1/250 sec. or slower. When shooting
a subject against a bright background with the fi ll-in fl ash, the background may be
overexposed.