42 EN
Shooting
2
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the aperture display will fl ash as
shown.
Display
Problem/solution
Low aperture value
2000
2000
F2.8
F2.8
Underexposure.
• Choose a slower shutter speed.
High aperture value
125
125
F22
F22
Overexposure.
• Choose a faster shutter speed. Shutter speeds as fast as
1/32000 s are available in silent mode.
• If the subject is still overexposed at the higher speed, the
limits of the camera metering system have been exceeded.
Use a third-party ND (Neutral Density) fi lter to reduce the
amount of light entering the camera.
• When using a fi xed [ISO] setting, change the setting.
g
“Changing ISO sensitivity
(ISO)” (P. 70, 80)
• The aperture value shown when the display fl ashes varies with the lens and focal length.
Adjusting Settings in Mode
S
Use the front and rear dials to adjust the following settings.
Front dial: Exposure compensation (P. 64)
Rear dial: Shutter speed
• Exposure compensation can also be adjusted using the
F
button. Press the
F
button and rotate the front or rear dial.
%
• You can choose the functions performed by the front and rear dials.
g
[
K
Dial
Function] (P. 164)
• You can use the
Fn
lever to reverse the roles of the front and rear dials. The lever can
also be assigned other roles.
g
[
K
Fn Lever Function] (P. 181)
• You can choose whether the display refl ects the effects of exposure settings or maintains
a constant brightness for ease of viewing. At default settings, the effects of exposure
settings are visible in the display.
g
[Live View Boost] (P. 167)
• Depending on the shutter speed selected, you may notice banding in the display caused
by fl icker from fl uorescent or LED light sources. The camera can be confi gured to reduce
the effects of fl icker during live view or when pictures are taken.
g
[Flicker Reduction]
(P. 184), [
K
Flicker Scan] (P. 194)
Содержание E-M5 Mark III
Страница 256: ......
Страница 257: ...WD532700 date of issue 2019 10...