2
22
EN
Hands-free recording/R
ecording monit
or
The recorder can be used as a hands-free recording
device. To set up the recorder for hands-free
operation, connect the optional Olympus Foot
Switch to the back of the docking station and place
the recorder in the docking station as shown in the
illustration below.
You can set the Hands-free function of the recorder
to [Dictation] (default) or [Transcription] by using
the customize functions of the ODMS software
(
☞
P.47). Using the ODMS software you can also
change the functions of the foot pedals.
For more details, refer to the online help for ODMS
software (
☞
P.50).
NOTE
• Move the slide switch to the STOP (
4
) position
before connecting it to the docking station for
hands-free recording.
• To record with better quality using the hands-
free recording function, set the microphone
sensitivity to [High] (
☞
P.38), or use an external
microphone.
It is possible to monitor your recording by listening
to it even while the recording is in progress. In
order to do so, insert the earphone plug into the
q
(earphone) jack and use the
+
or
–
buttons to control
the volume level.
+
,
−
(Volume)
button
NOTE
• When connecting an earphone or an external
microphone’s plug, insert the plug all the way in
as shown in the illustration above.
• To avoid irritation to the ear, insert the earphone
after turning down the volume level.
• Do not place earphones near a microphone as
this may cause feedback.
• The monitored audio may differ from the actually
recorded audio.
Hands-free recording
Recording monitor
