Olympus DP26, Инструкция по эксплуатации, Страница: 28 / 36

25
Under certain conditions, performance of the system may be adversely affected by factors other than defects. If
problems occur, please review the following list and take remedial action as needed. If you cannot solve the problem
after checking the entire list, please contact Olympus for assistance.
Problem Cause Remedy Page
Camera head does not work. The main switch of camera head is
OFF. Set the main switch of the camera
head to ON.
15,20
The AC adapter is connected
improperly.
*Only when using the camera cable
(9pins-4pins). Connect the AC adapter correctly to
the camera head and plug the power
cord firmly into a power outlet.
19
The camera cable is connected
improperly. Connect the camera cable correctly.
18
Nothing is displayed on the monitor. The monitor is not ON. Turn it ON.
–
The display cable is connected
improperly. Connect the display cable correctly.
–
The monitor resolution is set
improperly. Set the correct monitor resolution.
–
Live image is not displayed. The camera cable is connected
improperly. Connect the camera cable correctly.
18
The microscope illumination is off.
The microscope is not set to the
camera light path. The illumination
or specimen focusing is adjusted
improperly. Turn on the microscope illumination,
adjust the lighting and focusing
correctly, and select the camera light
path.
–
The ISO speed or exposure time is set
improperly. Set the ISO speed, exposure mode,
exposure time and level properly.
–
6
TROUBLESHOOTING GUIDE