Olympus CIX100, Инструкция по эксплуатации

Страница: 10 / 46

OLYMPUS CIX100 Cleanliness Inspector System
ATTENTION
Device damage from oversize or unsuitable samples
Samples that exceed the maximum permitted height can damage the lenses or the
stage. Make sure that the height of the sample doesn't impair the movement of the
objectives. Do not use any samples that prevent the free movement of the
nosepiece and the installed objectives. Pay attention to the different lengths of the
objectives when moving the nosepiece. Make sure that the sample does not
protrude the sides of the microscope stage.
ATTENTION
When the CIX100 stage is moved or the objective is changed, make sure that the
objectives do not touch the sample or sample holder at all. This is particularly
important when a new sample type has been mounted.
ATTENTION
When the stage is moved, either actively by the user or automatically by the system,
make sure that the current sample and sample holder do not impede the
movement of the stage. When the CIX100 software is used or the joystick is used to
control the stage movement, make sure that nothing hinders the movement of the
system.
ATTENTION
When mounting or unmounting a sample, please make sure that the stage is
moved such that the distance between objectives and sample position you are
working on is maximized. Before returning control of your system to the software
again after changing a sample, make sure that the distance between stage Z-
position and range of motion for the objectives is sufficient for all XY-positions of
the stage.
10