42
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Viewing Pictures
Monitor button
Monitor
Record mode
Date/time
File No.
Frame No.
Remaining battery power
Printing indicator
Protection indicator
Check that the lens barrier is
closed.
Operating Procedure
HQ
.12
12.23
1
23
3 45
1
2
-
12
1.
Keep the
monitor button
depressed for a moment.
[
The camera turns on and enters the
Playback mode. After a moment, the last
picture you took appears on the monitor.
[
The monitor information is displayed as
shown on the left.
[
After a moment, all displayed data except
the frame No. and remaining battery
power indicators disappear.
If no pictures have been saved,
“NO PICTURE” appears on the
monitor.
If there is a problem with the card, the
monitor shows the corresponding
message. (
Page 89)
If the remaining battery power is low, the
battery alarm indicator lights in red.
2.
Press the
monitor button again to
switch the monitor and camera power
off.
When the camera is powered by batteries, it turns off automatically when no
operation has been performed for one minute. If the camera has turned off,
press the
monitor button to resume operation.
Press until the
monitor turns on.
Monitor information
