16
En
En
J
SETTING THE DATE AND TIME
1
Set the mode dial to
C
and turn the camera on.
• MODE MENU is displayed.
2
Press
ac
to select the SETUP tab, then press
d
3
Press
ac
to select
X
, then press
d
.
• The green frame moves to the selected item.
• Press
c
repeatedly until
X
is displayed on the monitor.
4
Press
ac
to select one of the following date formats: Y-M-D
(Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y (Day/Month/
Year). Then press
d
.
• Move to the year setting.
• The following steps show the procedure used when the date and time settings
are set to Y-M-D.
5
Press
ac
to set the year, then press
d
to move to the month
setting.
• To move back to the previous setting, press
b
. The first two digits of the year
are fixed.
6
Repeat this procedure until the date and time are completely set.
• The time is displayed in the 24-hour format.
For example, 2pm will be displayed as 14:00.
7
Press
e
.
• For a more accurate setting, press
e
when the time signal hits 00 seconds.
8
To turn the camera off, press the power switch again.
• The date and time settings will be canceled if the camera is left without
the battery for a few days.
Note
basic_e_d4155_6.fm Page 16 Monday, December 8, 2003 10:02 AM