207
Troubleshooting
11
Misc
ella
ne
ous
Possible cause
Corrective action
Ref. page
Halation produces unnatural colors in the picture.
This may be caused by
excessively bright
ultraviolet light on the
subject, such as sunlight
shining through the
leaves of trees, window
frames in bright light at
night, reflection of metal
in direct sunlight, etc.
• Use a UV filter. As this may upset the
overall color balance, it should only be
used in the conditions described on the left.
• Process the picture using a graphics
application (Photoshop, Paint Shop Pro,
etc.). For example, after picking up
unnatural colors with a syringe tool, etc.
you can select color areas, and try color
conversion or saturation adjustment. For
details, refer to the manual for the graphics
application you are using.
—
Pictures you have taken do not appear on the monitor.
The power is off.
Slide the power switch to
q
.
The camera is in the
shooting mode.
Press the QUICK VIEW button or slide the
power switch to
q
.
There are no pictures on
the card.
NO PICTURE appears on the monitor.
Record pictures.
—
There is a problem with
the card.
Refer to “Error codes”.
The camera is connected
to a TV.
The monitor does not function when the AV
cable is connected to the camera.
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Display pictures with
9
and press
0
to
cancel protection.
No picture is displayed on the TV when connected to the camera.
The video output signal is
incorrect.
Set the video output signal according to the
region where used.
The TV video signal
setting is incorrect.
Set the TV to the video input mode.
The viewfinder or monitor is hard to see.
The brightness of the
viewfinder or monitor is
not adjusted properly.
Select
s
in the mode menu and adjust the
brightness.
The monitor is exposed to
direct sunlight.
Block the sunlight with your hand or use the
viewfinder.
—
