Direct printing (PictBridge)
148
8
P
rin
ti
n
g
pi
ct
ur
es
To trim a picture by [MORE] in [PRINT] or [MULTI PRINT] mode, follow the
procedure below.
1
Use the arrow pad and zoom
lever to select the trimming
position and size.
• Press
acbd
to move the trimming
frame.
• Move the zoom lever toward W or T to
select the trimming size from small
horizontal frame, large horizontal frame,
small vertical frame, and large vertical
frame.
• Use the control dial to select the height and width of the trimming frame.
• 3:2 trimming size can be selected when the size of the selected picture is
3,072 × 2,048.
• If trimming has already been performed, the [
P
] screen is displayed.
Select [RESET] and press
Z
.
2
Press
Z
.
3
Select [OK], and press
Z
.
OK
Saves the current trimming
size.
RESET
Sets a new trimming size.
→
Repeat the procedure from
Step 1.
CANCEL
Cancels the current trimming
setting.
• Press
Z
to complete trimming and return to the [PRINT INFO] screen.
Trimming
Note
• The size of the printed picture varies depending on the printer settings. If the
trimmed picture is small, printing magnification increases the picture
accordingly, resulting in a printed picture with lower resolution.
• For the best results with enlarged prints, you are recommended to use [TIFF],
[SHQ] or [HQ] mode.
OK
OK
OK
GO
GO
GO
OK
RESET
CANCEL
GO
GO
OK
OK
SELECT
SELECT
GO
OK
SELECT