Olympus CAMEDIA C-4040 Zoom, Справочное руководство

Страница: 93 / 200

93
Chapter 5
Metering modes — Metering the
subject brightness (Cont.)
e.g. : When metering 2 points (pressing twice).
The average values for the aperture and shutter speed as calculated by
metering 2 points. These values are recalculated every time another metering
point is added.
indicates the
average for the 2
metering points.
The average is
always shown at
the center of the
bar.
indicates how much
the present exposure you
are metering is different
from the average
exposure value. The
present exposure can be
fixed by pressing the
shutter button halfway
down. (The present
exposure is not added to
the average value unless
you press
.
)
When moves ±3 far from the center of the bar (the average reading), the
red
Éí
appears.
The reading with pressed.
indicates the number of times you have
pressed the button indicates the difference
between the metered and average readings.
●
If any of the following buttons are pressed during multi-metering, multi-
metering exposure is canceled.
(flash mode) button, mode dial, (macro/spot) button, .
●
If multi-metering is not engaged
T
In the Digital ESP mode, multi-metering is not available. Set the
metering mode to spot metering
or spot me macro mode
.
●
How to save the locked multi-metering exposure after shooting (AE
memory)
T
After pressing as many times as required in step 4, hold it
down for more than 1 second. MEMO appears.
When MEMO appears, the locked exposure is memorized.
TIPS