Olympus CAMEDIA C-4040 Zoom, Справочное руководство

Страница: 78 / 200

78
Chapter 4
4
Press the shutter button all the way to
stop recording.
●
The card access lamp blinks and the
camera begins storing the movie on the
card. You cannot record another movie
as long as the card access lamp is
blinking.
●
When the card access lamp stops
blinking, the camera has finished writing
the movie to the card. If there is any
space left on the card, the number of
seconds remaining is displayed. You
can start shooting another movie.
●
If you use all the displayed seconds remaining, shooting finishes
automatically and the camera starts writing the movie to the card.
If you take pictures continuously, the indication
changes as shown below.
Recording movies (Cont.)
●
Shooting is not possible.
T
Shooting is not possible while the camera is saving pictures to the
card. If the memory gauge goes off, you can take another shot.
T
If CARD FULL appears, there is no space left on the card. Delete
pictures (P. 130, 131), replace with a new card (P. 29) or transfer
pictures to a computer (P. 161 – 173).
TIPS
Before
shooting
After shooting, these indications may still be on the
screen. Shooting is not possible until they are gone.
Card access lamp
During shooting Shooting
finishes
automatically.