63
4
A
d
va
nc
ed sh
oot
in
g
Sequential shooting
This function allows you to take a rapid succession of still pictures by pressing
and holding the shutter button (approximately 12 pictures at 1.5 frames per
second only by sequential shooting in SQ2 mode). As you can choose the
best picture from a series of sequential shots, you are recommended to use
this mode when taking pictures of a moving subject. Focus, exposure and
white balance are locked at the first frame. You can also erase the unwanted
shots afterwards.
"Single-frame erase" (P.83)
1
In the shooting mode top menu,
select MODE MENU
→
CAMERA
Æ
DRIVE, and press .
"How to use the menus" (P.32)
2
Press
to select
, and
press .
• Press
again to exit the menu.
3
Take the picture.
• Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button.
• When the sequential shooting mode is set, the record mode setting is
fixed to SQ2. When the sequential shooting mode is canceled, the
record mode setting returns to the previous setting.
• The sequential shooting mode is canceled when the power is turned off.
"ALL RESET - Saving the camera's settings" (P.89)
• During sequential shooting, the flash is disabled.
• If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the pictures you
have taken. Whether or not all of the shots are saved depends on how
much battery power remains.
OK button
Arrow pad
Note
