27
1
Getting star
ted
Setting the date and time
6
Press
Ññ
to select one of the following
date formats: Y-M-D (Year/Month/Day), M-
D-Y (Month/Day/Year), D-M-Y (Day/ Month/
Year). Then press
í
.
•
Move to the year setting.
•
The following steps show the procedure used
when the date and time settings are set to Y-M-D.
7
Press
Ññ
to set the year, then press
í
to move to the month setting.
•
To move back to the previous setting, press
É
.
•
The first two digits of the year are fixed.
8
Repeat this procedure until the date and
time are completely set.
•
The camera only displays the time in the 24-hour
time system. (“2 pm” would be “14:00”.)
9
Press .
•
For a more accurate setting, press
when the time hits 00 seconds. The
clock starts when you press the button.
10
Close the lens barrier to turn the camera
off.
TIPS
•
The date and time can also be set from the playback mode.
•
The current settings are retained even when the power is turned off.
•
The camera’s default date and time settings will be restored after
about 12 hours with the battery removed. The settings will be
canceled more quickly if the battery was only loaded in the camera
for a short time before being removed. Before taking important
pictures, check that the date and time settings are correct.
Note
SELECT
SET
GO
2004 . 01 . 01
SELECT
SET
GO
20
0
4 . 01 . 01
