23
1
Getting star
ted
Power on/off
If the card is not recognized (card check)
When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
•
All data stored on the card is erased when the card is formatted.
Note
Monitor indication
Corrective action
There is no card in the camera or the card is not
inserted properly.
T
Turn off the camera, then insert a card. If a card
is already inserted, remove it and insert it again
correctly.
The card cannot record, play back or erase
pictures.
T
Replace the card with a new one.
Press
Ññ
to select POWER OFF, then press
.
T
Format the card.
Press
Ññ
to select
FORMAT, then press
to display the confirmation screen.
Select YES and press
.
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
NO CARD
SELECT
SELECT
GO
GO
CARD SETUP
CARD SETUP
POWER OFF
FORMAT
FORMAT