21
Meters/Feet selection
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow to select SETUP. Press the
OK button. Press the top/bottom arrows to select m/ft, press the right arrow
and top/bottom arrows to make the selection. Press the left arrow to confirm
the setting. Press the OK button twice.
Using the flash
Auto-flash
In the Auto-Flash mode, the flash will fire automatically in low-light and
backlight conditions. When you take a picture that is backlit, position the
subject within the backlighting correction marks to fire the flash.
Red-eye reducing flash
This mode significantly reduces the phenomenon of “red-eye”.
Fill-in flash (forced activation)
In the Fill-In Flash mode, the flash fires regardless of available light. For
example, this mode can be used to brighten up the subject’s shaded face.
Another use of this mode is to correct the color shift produced by artificial
lights (eg. fluorescent light).
Off (flash override)
In the Off mode, the flash does not fire even in low-light conditions. Use this
mode in situations where flash photography is not desired or is prohibited, or
in twilight/night scenes.
Selecting the flash mode
With each press of the Flash mode button, the flash mode will switch from
Auto-Flash to
(Red-Eye Reducing Flash),
(Fill-In Flash) and
(Flash Off). If the Orange lamp lights when the Shutter release button is
pressed halfway, the flash is ready to fire.
Flash working range:
Wide-angle
Telephoto
Approx. 0.8 ~ 3.8 m
Approx. 0.2 ~ 3.8 m
