Olympus BXFM Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 88

background image

4

CAUTION - Electric safety -

Always use the power cord provided by Olympus.

If the proper AC adapter, the power cord and other cables are not used, the electric safety and the EMC (Electro-
Magnetic Compatibility) performance of the product cannot be assured. If no power cord is provided, please select the
proper power cord by referring to the section “Proper selection of the power cord” at the end of this instruction manual.

Always connect the ground terminal.

Connect the ground terminal of the power cord and that of the power outlet. If the product is not grounded, our
intended electric safety and EMC performance of the product can not be assured.

Do not use the product in close proximity to the sources of strong electromagnetic radiation.

Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of the
product.

Remove the power cord in case of emergency.

In case of emergency, be sure to unplug the power cord from the power cord connector on the product or from the
wall power outlet.
Install the product at the location where you can reach the power cord connector or the wall power outlet at hand to
remove the power cord quickly.

CAUTION - Protection for electric shock -

Keep the power cord and cables sufficiently away from the lamp housing.

If the power cord and cables contact a hot area of the lamp housing, they could melt and cause electric shock.

Do not insert any tools or metal fragments in the air vents of the product.

Doing so could cause electric shock, ignition or failure of the product.

Do not touch the product with a wet hand.

In particular, if you touch the main switch of the power unit or the power cord with a wet hand, electric shock, ignition
or failure of the product may be caused.

«
...
8
9
10
11
12
...
»

Содержание BXFM

























































































Отзывы:

Нет отзывов

Похожие инструкции для BXFM

Бренд: Olympus Страницы: 20

Бренд: Zeiss Страницы: 22

Бренд: Levenhuk Страницы: 20

Бренд: Nikon Страницы: 41

Бренд: Zeiss Страницы: 134

Бренд: Meiji Страницы: 11

Бренд: Meiji Страницы: 15

Бренд: Zeiss Страницы: 326

Бренд: Olympus Страницы: 12

Бренд: Olympus Страницы: 8

Бренд: Olympus Страницы: 41

Бренд: OPTIKA MICROSCOPES Страницы: 32

Бренд: OPTIKA MICROSCOPES Страницы: 32

Бренд: OPTIKA MICROSCOPES Страницы: 38

Бренд: Optika Italy Страницы: 40

Бренд: OPTIKA MICROSCOPES Страницы: 44

Бренд: OPTIKA MICROSCOPES Страницы: 48

Бренд: OPTIKA MICROSCOPES Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды