58
2
Sh
oot
ing an
d play
bac
k ba
sics
Erasing pictures (Single-frame erase)
This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.
“All-frame erase” (P.163)
• You cannot erase pictures that are protected or stored on a write-
protected SmartMedia card. Cancel protection or remove the write-
protect seal before erasing such pictures.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
keep.
“Protecting pictures” (P.57)
• Pictures protected (read only) by the PC are also erased. To prevent
erasure, the pictures have to be protected on the camera.
“Protecting pictures” (P.57)
1
Set the mode dial to
and
turn the camera on.
“Power on/off” (P.31)
• The monitor turns on.
2
Use the arrow pad or jog dial to
display the picture you want to
erase.
“Viewing still pictures” (P.53)
3
Press .
• The
ERASE screen is displayed.
4
Press
to select YES, then
press .
• The picture is erased and the menu is
closed.
Note
Mode dial
Mode dial
Power switch
Jog dial
Arrow pad
Erase button
YES
NO
SELECt
GO
ERASE