background image

57

EN

5

Focusing and shoo

ting functions

Single-frame shooting 

o

Shoots 1 frame at a time when the shutter button is pressed 
(normal shooting mode).

Sequential shooting 

j

Shoots at 3.5 frames/sec. for as long as the shutter button is 
pressed (during JPEG).

• Press the shutter button fully and keep it pressed. The camera will take pictures in 

sequence until you release the button.

• Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).

x

Notes

• During sequential shooting, if the battery check blinks due to low battery, the camera stops 

shooting and starts saving the pictures you have taken on the card. The camera may not save 
all of the pictures depending on how much battery power remains.

Setting method

Setting display

• You can check the settings in the viewfinder while using 

the 

j

/

Y

/

<

 button to make the settings.

• Anti-shock display (

g

P. 60):

The 

D

 symbol displayed next to the icon on the super control panel indicates that anti-shock 

is activated.

Sequential shooting

Direct button

j

/

Y

/

<

j

Super control panel

i

p

: [

j

/

Y

/

<

]

SELECT

GO

j

j

/

Y

/

<

 button

i

 button

:

Single-frame shooting

:

Sequential shooting

Single-frame shooting/

Sequential shooting

Self-timer

:

12-second self-timer

  :

2-second self-timer

Remote control

:

0 second

:

2 seconds

s0018_e_00_0_unified.book  Page 57  Tuesday, March 18, 2008  4:08 PM

Содержание 262090





















































































































































Отзывы: