106
EN
Cust
omizing your
c
amer
a
7
To compare the difference in adjustment values:
j
You can use light box display to compare adjustment values. The adjustment values are also
displayed during light box display.
g
“Light box display” (P. 83)
To register two types of adjustment values (with the focal point of the lens in front of
and behind the subject):
j
You can register multiple adjustment values for the same lens. Select the adjustment value to be
applied during shooting with the
[DATA LIST]
screen.
To register two of the same type of lens individually:
j
You can individually register multiple numbers of the same type of lens.
To specify and register AF targets, or to register the adjustment values for the wide
and telephoto directions of the zoom:
j
On the
[LENS DATA SET]
screen, press
d
to make the following settings.
• You can specify individual AF targets and adjust each AF target. Normally, the adjustment
values for all AF targets are registered.
• You can register different adjustment values for the wide and telephoto directions of the zoom.
Normally, the adjustment value for the telephoto direction is registered.
EXPOSURE SHIFT
You can adjust the default value for optimal exposure for each metering mode according to
your preference. This can be set in 1/6 EV increments ranging from -1.0 EV to +1.0 EV.
x
Notes
• The exposure compensation can be set from -5.0 EV to +5.0 EV. Setting
[EXPOSURE
SHIFT]
reduces the range of the direction in which the default value is adjusted.
• You cannot check the exposure shift value during shooting. To make normal adjustments to
the exposure, perform exposure compensation.
g
“Exposure compensation” (P. 47)
BATTERY TYPE
The characteristics of AA batteries may differ depending on the battery type and brand. When
using the optional power battery holder (HLD-4) with AA batteries, you can set the battery
voltage level of the battery check display according to the battery characteristics. Normally,
there is no need to change this.
[
b
]
This is the standard setting for battery characteristics of AA alkaline batteries,
Oxyride batteries, and lithium batteries.
[
c
]
The warning level is set lower than that of
[
b
]
.
[
d
]
The warning level is set lower than that of
[
c
]
.
• To attach the power battery holder to the camera, remove the
camera’s battery cover, as shown in the diagram to the right.
x
Notes
• Depending on the status of the batteries being used, this function may not work properly.
• The number of pictures that can be taken increases in the order of
[
b
] [
c
] [
d
]
;
however, no more pictures may be able to be taken without a warning display.
1
2
s0017_e_00_0_unified.book Page 106 Thursday, October 30, 2008 2:47 PM
