54
EN
4
Focusing and shooting functions
N
Dynamic-single target AF mode
If the camera cannot focus on the subject using the
selected AF target, the camera focuses using the adjacent
AF target.
• When the button is released, the currently selected AF
target lights. When
M
or
N
is set, you can select the
AF target to be used at that point. For operation, refer to
Step 2 in “Selecting the AF target position” (
g
P. 54)
in the next section.
• When
M
or
N
is set, you can turn the dial to select
the AF target.
• When
M
or
N
is set, you can select the AF target with
p
.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the
P
button and release your finger to enable selection of the AF target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac
, and use the sub dial to perform the same
operation as
bd
.
• You can change the operation of the dials and arrow pad
for selecting the AF target.
g
“
P
SET UP” (P. 91)
• Press the
i
button to return the position of the AF target
to the center.
Direct button
P
+
k
Super control panel
i
p
: [AF AREA]
P
+
k
Menu
MENU
[
X
]
[AF AREA]
Selected AF target
i
button
MENU
button
P
button
k
s0011_e_00_0_unified.book Page 54 Wednesday, September 12, 2007 4:46 PM