Olympus 228000, Инструкция по эксплуатации

Страница: 38 / 94

38
EN
Sequential shooting/using the self
timer
The camera takes photos while the shutter button is
pressed all the way down. Alternatively, the self-timer
can be used for self- or group-portraits or to reduce
camera shake when the camera is mounted on a tripod or
otherwise
fi xed in place.
1
Press G (
j Y
) to display drive options.
2
Use
HI
to highlight an option and press
A
to select.
Option Description
Single
One frame is shot each time the
shutter button is pressed.
Sequential *1
Take sequential shots using the
focus, brightness (exposure) and
white balance for the
fi rst frame.
High-Speed1
The camera takes sequential shots
at a faster speed than in [Sequential].
High-Speed2
The camera takes sequential shots at
a faster speed than in [High-Speed1].
BKT *2
Sequential shooting that
automatically varies settings for each
frame (bracketing).
Y 12 sec
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
Y 2 sec
The self-timer lamp blinks for approx.
2 seconds, and then the picture is
taken.
*1
Frame rate varies with image size (p. 41).
*2
Bracketing is available when [AE-BKT] or [WB-BKT] is
selected for [Bracket Settings] (p. 48).
Red-eye reduction (p. 37) is not available at a setting
of [Sequential]. The fl ash turns off automatically when
[High-Speed1] or [High-Speed2] is selected.
Image size is fi xed at 2560 × 1920 and ISO sensitivity
is fi xed at [ISO Auto] when [High-Speed1] or [High-
Speed2] is selected.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts To cancel the self-timer after it starts
Press the
m
button.
Adjusting the brightness
(exposure compensation)
The standard brightness (appropriate exposure) set by the
camera based on the shooting mode (except for
A
,
M , SCN ) can be adjusted brighter or darker to obtain a
desired shot.
1
Press F ( F ) to display exposure
compensation options.
2
Use HI to choose the value and press
A
to
select.
Brightening the monitor
To temporarily boost to monitor brightness, press and
hold the
INFO button. Brightness returns to normal if no
operations are performed for 10 seconds.